User guide

E
XTREME
W
ARE
S
OFTWARE
U
SER
G
UIDE
15-11
IPX C
ONFIGURATION
E
XAMPLE
IPX C
ONFIGURATION
E
XAMPLE
Figure 15-2 builds on the example showing the IP/RIP configuration that was used in
earlier chapters. Now, in addition to having IP VLANs configured, this example
illustrates a switch that has the following IPX VLANs defined:
• Exec
— Protocol-sensitive VLAN using the IPX protocol with the filter IPX_8022
— All ports on slot 4 and slot 5 have been assigned to Exec
— Exec is configured for IPX NetID 2516 and IPX encapsulation type 802.2
• Support
— All ports on slot 7 have been assigned to Support
— Support is configured for IPX NetID A2B5 and IPX encapsulation type 802.2
enable ipxsap Enables IPX/SAP on the router.
enable ipxsap gns-reply {vlan <name>} Enables GNS reply on one or all IPX
interfaces. If no VLAN is specified, GNS reply
is enabled on all IPX interfaces. The default
setting is enabled.
Table 15-5: IPX/SAP Configuration Commands (continued)
Command Description