User guide

12-20 E
XTREME
W
ARE
S
OFTWARE
U
SER
G
UIDE
I
NTERIOR
G
ATEWAY
R
OUTING
P
ROTOCOLS
R
ESETTING AND
D
ISABLING
RIP
To return RIP settings to their defaults, or to disable RIP, use the commands listed in
Table 12-4.
Table 12-4: RIP Reset and Disable Commands
Command Description
config rip delete [vlan <name> | all] Disables RIP on an IP interface. When RIP is
disabled on the interface, the parameters are not
reset to their defaults.
disable rip Disables RIP.
disable rip aggregation Disables the RIP aggregation of subnet
information on a RIP v2 interface.
disable rip export [static | direct | ospf |
ospf-intra | ospf-inter | ospf-extern1 |
ospf-extern2 | static | vip] metric <metric>
{tag <number>}
Disables the distribution of non-RIP routes into
the RIP domain.
disable rip originate-default Disables the advertisement of a default route.
disable rip poisonreverse Disables poison reverse.
disable rip splithorizon Disables split horizon.
disable rip triggerupdates Disables triggered updates.
unconfig rip {vlan <name>} Resets all RIP parameters to match the default
VLAN. Does not change the enable/disable state
of the RIP settings. If no VLAN is specified, all
VLANs are reset.