User guide

11-28 E
XTREME
W
ARE
S
OFTWARE
U
SER
G
UIDE
IP U
NICAST
R
OUTING
R
ESETTING AND
D
ISABLING
R
OUTER
S
ETTINGS
To return router settings to their defaults and disable routing functions, use the
commands listed in Ta ble 11- 8
show ipfdb {<ipaddress> <netmask> | vlan
<name> }
Displays the contents of the IP forwarding
database (FDB) table. If no option is
specified, all IP FDB entries are displayed.
show iproute {priority | vlan <name> | permanent
| <ipaddress> <mask> | origin [direct | static |
blackhole | rip | bootp | icmp | ospf-intra |
ospf-inter | ospf-as-external | ospf-extern1 |
ospf-extern2]} {sorted}
Displays the contents of the IP routing table
or the route origin priority.
show ipstats {vlan <name>} Displays IP statistics for the CPU of the
system.
Table 11-8: Router Reset and Disable Commands
Command Description
clear iparp {<ipaddress> | vlan <name>} Removes dynamic entries in the IP ARP table.
Permanent IP ARP entries are not affected.
clear ipfdb {<ipaddress> <netmask> | vlan
<name>]
Removes the dynamic entries in the IP
forwarding database. If no options are specified,
all IP FDB entries are removed.
disable bootp vlan [<name> | all] Disables the generation and processing of
BOOTP packets.
disable bootprelay Disables the forwarding of BOOTP requests.
disable icmp address-mask {vlan <name>} Disables the generation of an ICMP
address-mask reply messages. If a VLAN is not
specified, the command applies to all IP
interfaces.
disable icmp parameter-problem {vlan
<name>}
Disables the generation of ICMP
parameter-problem messages. If a VLAN is not
specified, the command applies to all IP
interfaces.
disable icmp port-unreachables {vlan
<name>}
Disables the generation of ICMP port
unreachable messages. If a VLAN is not
specified, the command applies to all IP
interfaces.
Table 11-7: Router Show Commands (continued)
Command Description