User guide

E
XTREME
W
ARE
S
OFTWARE
U
SER
G
UIDE
11-19
IP C
OMMANDS
IP C
OMMANDS
Tab le 11-4 describes the commands used to configure basic IP settings.
create udp-profile <profile_name> Creates a UDP-forwarding profile. You
must use a unique name for the
UDP-forwarding profile.
delete udp-profile <profile_name> Deletes a UDP-forwarding profile.
show udp-profile {<profile_name>} Displays the profile names, input rules of
UDP port, destination IP address, or VLAN
and the source VLANs to which the profile
is applied.
unconfig udp-profile vlan [<name> | all] Removes the UDP-forwarding profile
configuration for one or all VLANs.
Table 11-4: Basic IP Commands
Command Description
clear iparp {<ipaddress> <mask> | vlan <name>} Removes dynamic entries in the IP ARP
table. Permanent IP ARP entries are not
affected.
clear ipfdb {<ipaddress> | vlan <name> } Removes the dynamic entries in the IP
forwarding database. If no options are
specified, all dynamic IP FDB entries are
removed.
config bootprelay add <ipaddress> Adds the IP destination address to forward
BOOTP packets.
config bootprelay delete [<ipaddress> | all] Removes one or all IP destination
addresses for forwarding BOOTP packets.
config iparp add <ipaddress> <mac_address> Adds a permanent entry to the ARP table.
Specify the IP address and MAC address
of the entry.
Table 11-3: UDP-Forwarding Commands (continued)
Command Description