User guide

E
XTREME
W
ARE
S
OFTWARE
U
SER
G
UIDE
10-15
ESRP C
OMMANDS
config vlan <name> esrp election-algorithm
[ports_track_priority_mac | track_ports_priority_mac
| priority_ports_track_mac |
priority_track_ports_mac | priority_mac_only]
Configures the election algorithm on the
switch. The algorithm must be the same
on all switches for a particular VLAN.
Specify one of the following:
■
ports_track_priority_mac —
Active ports, tracking information,
ESRP priority, MAC address
■
track_ports_priority_mac —
Tracking information, active ports,
ESRP priority, MAC address
■
priority_ports_track_mac —
ESRP priority, active ports, tracking
information, MAC address
■
priority_track_ports_mac —
ESRP priority, tracking information,
active ports, MAC address
■
priority_mac — ESRP priority, MAC
address
The default setting is
ports_track_priority_mac. If no
tracking information is configured for a
particular field, the field is ignored.
config vlan <name> esrp priority <value> Configures the ESRP priority. The range is
0 to 255. The higher number has higher
priority. The default setting is 0. A setting
of 255 configures the switch to be in
standby state.
config vlan <name> esrp timer <hello_timer> Configures the time between ESRP
updates. The range is 1 to 255 seconds.
The default setting is 2 seconds. The timer
setting must be configured identically for
the VLAN across all participating switches.
config vlan <name> esrp-group <group number> Configures the virtual MAC address to be
used for the ESRP VLAN. The default
group number is 0.
config vlan <super_ESRP_VLAN> add
domain-member vlan <sub_ESRP_VLAN>
Adds a VLAN to an ESRP domain. ESRP
is performed in the domain master VLAN,
and not the other domain members.
config vlan <super_ESRP_VLAN> delete
domain-member vlan <sub_ESRP_VLAN>
Deletes a VLAN from an ESRP domain.
Table 10-1: ESRP Commands (continued)
Command Description