User guide

E
XTREME
W
ARE
S
OFTWARE
U
SER
G
UIDE
8-9
D
ISABLING AND
R
ESETTING
STP
This command displays the following information:
• STPD name
• Bridge ID
• STPD configuration information
To display the STP state of a port, use the following command:
show stpd <stpd_name> port <portlist>
This command displays the following:
• STPD port configuration
• STPD state (Root Bridge, and so on)
• STPD port state (forwarding, blocking, and so on)
D
ISABLING AND
R
ESETTING
STP
To disable STP or return STP settings to their defaults, use the commands listed in
Tab le 8-2.
Table 8- 2: STP Disable and Reset Commands
Command Description
delete stpd <stpd_name> Removes an STPD. An STPD can only be removed if
all VLANs have been deleted from it. The default
STPD, s0, cannot be deleted.
disable ignore-stp vlan <name> Allows a VLAN to use STP port information.
disable stpd [<stpd_name> | all] Disables the STP mechanism on a particular STPD,
or for all STPDs.
disable stpd port <portlist> Disables STP on one or more ports. Disabling STP
on one or more ports puts those ports in
forwarding
state; all BPDUs received on those ports will be
disregarded.
unconfig stpd {<stpd_name>} Restores default STP values to a particular STPD or
to all STPDs.