Quick Start Guide

5 Select Provide SSID to classify devices based on the SSID that the device associates itself to at the
site.
When classifying devices using SSIDs, you must manually provide the SSID that is used for the
classification. Use the button to add SSIDs manually. The following field appears when you
select the button.
Enter a valid SSID into the SSID field and select Add to add the entered SSID to the list. Then, select
the appropriate SSID from the SSID drop-down list to create your classification rule.
6 Select Visitor Duration to add a rule that classifies a visitor based on the length of time the visitor
stays in the site.
Use the fields to set the minimum duration in hours and minutes the visitor needs to spend inside
the site for it to be classified automatically.
7 Select Save to save the changes made to the Device Classification parameters.
At any time, select the Reset button to revert the changes made to the device classification
parameters.
8
Select the
icon. The following menu displays.
ExtremeLocation Quick Setup
ExtremeLocation Quick Start Guide 89