Quick Start Guide
Table Of Contents
- Table of Contents
- Preface
- 1: Product Overview
- 2: ExtremeLocation Quick Setup
- Before You Start
- Step 1: Create the ExtremeLocation Account
- Step 2: Activate the ExtremeLocation Account
- Step 3: Generate and Apply the License
- Step 4: Configure the Access Points
- Step 5: Configure a Category
- Step 6: Configure the ExtremeLocation Service
- Step 7: Create your First Experience
- Step 8: Configure the ExtremeLocation Dashboard
- Step 9 (Optional): Device Classification
Field Description
Maximum Allowed Use the spinner to set the number of times this experience is to be
delivered. When this value is exceeded, delivery of this experience is
stopped. Depending on the configuration of the Max Allowed Interval
field, delivery of this experience may be restarted.
Max Allowed Interval Use this drop-down list to configure a time duration within which the
experience is to be delivered.
For example, if the value for this field is set to Hour and the value for the
Maximum Allowed field is set to 5000, then, a maximum of 5000
experiences can be delivered per hour. If, within an hour, all 5000
experiences are delivered, then no more experiences are delivered for
the reminder of the hour. This counter is reset at the end of each hour.
3 Provide the following information for the Repeat field:
Field Description
Allow Repeats Use this toggle button to enable or disable repeat deliveries of the same
experience to the same visitor. When set to Off the experience is not
resent to the visitor.
Maximum Per User Use the spinner to set the maximum number of times this experience's
payload is delivered to the visitor.
Per User Interval Use the spinner to set the time interval in minutes after which the visitor
can start receiving the payload again. A visitor will not receive the same
payload again within the above configured time value.
For example, if the Per User Interval value is set at 2 and the Maximum
Per User value is set at 3, then the user will receive a maximum of three
(3) payloads every two (2) minutes.
4 Provide the following information for the
Retarget field.
Field
Description
Retarget Use this toggle button to enable or disable how the payload is delivered.
Count Use the spinner to set the number of times an experience need to be hit
before its payload is delivered to the user.
Timespan Use the spinner to set the time duration in minutes within which the
number of hits configured in the Count field is reached.
For example, if the Count value is set to 3 and the Timespan value is set
to 2, then the payload configured for this experience is only delivered if
the experience is hit three (3) times within two (2) minutes.
5 Select the SAVE button to save the changes made to this screen.
Add Payload
The Payload tab sets the payload that is associated with this experience. You can add/modify/remove
the associated payload from this screen.
Note
You can associate only one (1) payload with this experience.
ExtremeLocation Quick Setup
ExtremeLocation Quick Start Guide 71










