Quick Start Guide

8 Select the Settings heading to expand it.
Configure the following settings:
Field
Description
Dwell Time You can now configure the Dwell Time for each site. The App User Dwell
Time slider has two knobs that control the Outside, Inside Bounce
and Inside Engage durations. Use these knobs to set the appropriate
durations for these visit types.
Visit Duration (minutes) Use the spinner to set the Visit Duration in minutes the user must spend
within a site before an App license is considered consumed. This value
along with the value configured in the Capture Zones field are
considered before an App License is considered consumed.
For example, if the Visit Duration value is five (5) and the Capture Zones
value is two (2), then an app license is considered consumed only when
the visitor has spent five minutes in the site and has already visited two
categories.
Capture Categories Use the spinner to set the number of zones an app user device must visit
before considering an App License is consumed. This value along with
the value configured in the Visit Duration field are considered before an
App license is considered consumed.
For example, if the Visit Duration value is five (5) and the Capture Zones
value is two (2), then an App license is considered consumed only when
the visitor has spent five minutes in the site and has already visited two
categories.
9 Select the Save button to save and create the new site.
At any point of time, select the Cancel button to exit without creating the site.
The new site is created with the information provided in this dialog. The site becomes available for
use immediately.
ExtremeLocation Quick Setup
ExtremeLocation Quick Start Guide 48