Quick Start Guide

Field Description
Name Displays the name assigned to this beacon.
MAC Address Displays the MAC address of this beacon.
Site Displays the name of the site where this beacon is deployed.
Category Displays the name of the category to which this beacon is associated.
Interval Displays the configured beacon broadcast interval for this beacon.
Radius Displays the Radius value for this beacon. This indicates the broadcast
strength of the beacon.
Firmware Displays the Firmware version supported by the beacon.
UUID Displays the unique UUID assigned to this beacon.
Type Displays the type of beacon.
Battery Displays the remaining battery life of this beacon.
Status Displays the status of the beacon.
Note
You cannot add or modify beacons using this screen.
No beacons are displayed for this category as they have not been assigned this category
yet.
10 Select the AP menu item.
The Access Point Categories screen displays.
The following information is displayed.
Field
Description
AP MAC Displays the MAC address of this access point.
Host Name Displays the host name assigned to this access point. If the host name is
not assigned, shows a blank entry.
Site Name Displays the name of the site where this access point is deployed.
Floor Name Displays the name of the floor where this access point is deployed.
ExtremeLocation Quick Setup
ExtremeLocation Quick Start Guide 36