Quick Start Guide

Field Description
Site Wide Select this switch to enable the category to be marked as Sitewide .
When marked as Site Wide , any experience that is attached to this
category is triggered when a user's device sees any beacon at the site or
if the device is within the Geofence boundary set for this site.
Use the following values to control when the experience is triggered.
•
Any - When this option is selected, the experience will be
triggered if the visitor device sees a beacon or is inside the
Geofence for the site.
•
Beacon - When this option is selected, the experience is only
triggered when the visitor device sees a beacon assigned to
this site.
•
Geofence - When this option is selected, the experience is
only triggered when the visitor device is within the marked
Geofence boundaries of this site.
Physical Web URL Use this field to configure a web URL. Any beacon associated with this
category that is broadcasting with the Physical Web mode will re-
direct the visitor to this external web URL when it enters this category.
4 Select the Save button to save the changes made to the Settings screen.
5 Select the Beacon Defaults menu item
The Beacon Default screen displays.
Select the icon to update this category's Beacon Defaults configuration. Configure the
following:
Field
Description
Advertisement Interval (ms) Set the duration in milliseconds between two consecutive beacon
broadcasts.
Radius This value configures the strength of the beacon's broadcast. Use the
spinner to set the strength in the range 1-8 where 8 is the strongest
signal with maximum broadcast range.
ExtremeLocation Quick Setup
ExtremeLocation Quick Start Guide 33