Quick Start Guide

•
Add or update the Sensor Policy configuration.
•
Set the Location Server Configuration.
•
Set the Extreme AirDefense Server Configuration.
•
Set the Country of Operation.
3 Set the Radio mode in the device's profile:
•
Configure a radio to be a dedicated sensor or multitask as a sensor along with sending and
receiving trac.
Note
To successfully import access points into your ExtremeLocation managed sites, the access
points must be online and must be reporting to ExtremeLocation.
Once you have completed the above configuration on each of the access point to be deployed, you
must go to each site and upload a list of those access points that will be deployed there.
1 From the Sites screen, select the site for which you need to upload the list of access points. You
must use the drop-down list to select the site and then select the icon to edit it. You could also
use the
icon to view a lists of the sites managed by your ExtremeLocation account. In this case
select the icon located under the Actions column to edit the site.
2 Select the Additional tab located to the bottom of the Sites edit dialog.
3 Use the AP Placement field to upload your .csv file containing the list of access points to be
deployed at this site.
4 You should now see a list of all access points that are available for deployment in your Sites > Floor
> AP screen.
ExtremeWireless Access Points
The following ExtremeWireless access points are supported by ExtremeLocation.
•
ExtremeWireless AP3805
•
ExtremeWireless AP3825
•
ExtremeWireless AP3912
•
ExtremeWireless AP3915
•
ExtremeWireless AP3916
•
ExtremeWireless AP3917
•
ExtremeWireless AP3935
•
ExtremeWireless AP3965
•
ExtremeWireless AP560
•
ExtremeWireless AP510
•
ExtremeWireless AP505
Note
It is assumed that you have access to configure the required ExtremeWireless devices.
ExtremeLocation Quick Setup
ExtremeLocation Quick Start Guide 29