Migration Guide

2 Select Sensor from the menu on the left.
The Sensor screen displays.
3 Select + Add Row from within the Location Tracking System list.
This adds a new row in the Location Tracking System table. Only one row can be configured for this
table.
Provide the following information:
Server Id
Use the spinner control to assign a numeric ID for the ExtremeLocation server. The default ID
value is 1.
IP Address/
Hostname
Provide the host name of the ExtremeLocation server. Host name cannot exceed 64
characters or contain an underscore.
The URL to be configured is:
•
http://feeds1.extremelocation.com
Note
This field must not contain the IP address of the above server. Due to load
balancing, the IP address might change periodically.
Port Use the spinner control to specify the port of the ExtremeLocation server. The default port is
443.
Verify Migration in ExtremeLocation
ExtremeLocation Migrating Location Based Services from ADSP to ExtremeLocation for
version 1.2.0 32