Migration Guide

Migration Errors
Possible Causes of Migration Failure
These are the possible causes for the migration to fail.
Error Mitigation
Passing wrong arguments to the script. The script prompts the error. User needs to pass correct
arguments to the script.
Passing wrong number arguments to the script. The script prompts the error. User needs to pass the
correct number of arguments to the script.
When executing the script from a Linux machine, the
script does not have execute permissions.
Change the permissions using chmod command.
Wrong API Key provided while performing Upload or
Migrate using the script.
The script tries three (3) times with the passed API Key
before failing. User should verify API key before running
the script.
Wrong path of the FloorPlan.zip file is provided
to the script.
The script responds with a
File Not Found
error. User should verify that the correct path to the
FloorPlan.zip is provided before running the
script.
Connection issues to the ExtremeLocation server due to
network failure or the ExtremeLocation server is down
for upgrade or maintenance.
When the ExtremeLocation is not reachable, the script
tries three (3) times before failing. Ensure you can reach
the ExtremeLocation server for the entire duration the
script is running. If the server is down for maintenance
or upgrade, please wait for sometime before trying to
run the script again.
A previous attempt to migrate has failed and migration
data is still present on the device used to run the
migration script. Another attempt to migrate the same
Floorplan is being done.
In case for an attempt to migrate has failed, some
migration data is retained on the device that ran the
migration script. This data must be removed before
trying again. To clear the residual migration data, use
the clear option of the migration script.
Client Side Errors
Error
Cause Mitigation
Invalid command
Command entered by the user is not
among the supported commands
Check the commands with --help
option.
Invalid arguments
Command sequence or options are
wrong
Check the commands with --help
option.
Failed to find host.
Please configure host
in migration-
client.properties
Could not find host information in
migration-
client.properties property
setting
Please configure the correct
ExtremeLocation host in the
migration-
client.properties setting
Migrating ADSP Location Based Services
ExtremeLocation Migrating Location Based Services from ADSP to ExtremeLocation for
version 1.2.0 23