Configuration Guide

Setting NotificationParameters
91 of 291
4. In the Provider Name field, enter the name of the provider.
5. In the Provider Gateway / Host field, check the available URL details.
The value displayed in this field is based on the option selected in the API
Type field.
6. In the API Key field, enter the key details obtained from Clickatell.
7. In the API Type field, select the type from the drop-down list.
By default, REST option is selected.
8. Click Test, to test the added gateway services configuration.
The Test Gateway Configuration screen is displayed.
9. In the Add SMS Provider screen, do the following:
1. Enter the phone number in the Test Destination Mobile Number field.
2. Click Send Test SMS to send the SMS or click Close to close the screen.
10. Click Save to save the configuration or click Cancel to cancel the changes.
The added provider gateways details are displayed in the SMS Gateway
screen along with Phone Provider, Provider Gateway and Protocol (REST /
HTTP) details.
11. Select the required added provider gateway and click Set as default option in the
SMS Gateway screen.. On Guest User summary screen, the complete address as
specified in the SMS provider configuration is now displayed with the essential part
of the name.
12. (Optional) Select the required added carrier and click Edit to modify the SMS
provider. For more information, see Modifying SMS Gateway/Providers.
13. (Optional) Select the required added provider gateway(s) and click Delete option in
the SMS Gateway screen to clear the added provider service. You will be asked to
confirm the deletion.
Tip:
Use Ctrl / Shift to select multiple records to delete.
Field Descriptions
Use the data in the following table to use the Add SMS Provider screen.