Configuration Guide

Managing Access Control Engine
80 of 291
3. In the Certificate File field, click Browse to select the certificate from the local folder
and click Open to upload.
4. In the Alias for this Certification field, enter the alias name to assign another name
for the selected new certificate.
5. Click Save to save the configuration or click Cancel to cancel the changes.
The added Root Certificate details are displayed in the Root Certificates
table and Update Trust Mode is enabled.
6. Click Trust Mode.
There are two options under the Update Trust Mode:
1. Select All server certificates are accepted. By default, this option is selected
where all the server certificates are accepted. However, the Trust Mode gets
highlighted in RED.
2. Select Any untrusted server certificate is rejected so that the certificate from
the server is validated against the root certificates available in Guest and IoT
Manager. The untrusted certificates are rejected if the identity is not verified.
We recommend this as the safest option to be selected.
3. Click Save to save the configuration or click Cancel to cancel the changes.
7. (Optional) Select the required Root Certificate(s) and click Delete to remove the
certificates.
Tip:
Use Ctrl / Shift to select multiple records to delete.
Field Descriptions
Use the data in the following table to use the Add Root Certificate screen.
Name Description