User's Guide

Network Response Time Graph
72 of 218
Filters
You can also use the filter options at the top of the window to search for specific
criteria. Using these fields limits the data to Tracked Applications, Application,
Username, Device Family, Client Site, and Server Site. Entering a value in one of
these fields filters the results displayed in the graphs below. Clear the data by
clicking the Clear ( ) button to the right of the filter options.
Network Response Time Graph
The Network Response Time graph displays the response time (in milliseconds)
the TCP request took to complete for the Top N slowest Targets. The data in this
graph depends on the criteria you select in the toolbar at the top of the window
and can be filtered to match specific criteria. Extreme Management Center
displays data collected by the ExtremeAnalytics engine over the previous 20
minutes updated every 15 seconds. Use the Pause button in the toolbar to stop
the graph from updating. Clicking the Unpause button resumes the updates and
refreshes the graph with the most up-to-date data.
Hover over a point in the graph to see a pop-up with details about that
application at that moment in time.
Clicking on a point opens a flow data table for that Target at that time at the
bottom of the window, limited to match any filters you applied. Right-click a row
in the flow to see additional options for working with that flow. Flows without an
identified source are labeled with the device's IP Address.