User's Guide

Updating Fingerprints
175 of 218
7. Select the Enforce Updates checkbox to automatically update fingerprints on all
engines. Not selecting this checkbox requires you to update each engine manually.
8. The Update Site field displays the default path to the official fingerprint update site.
Typically, this field does not change unless for security reasons the system does not
have access to the internet and an internal update site must be used.
9. The Update Site Port is the port on the update site to which the update connects.
The port cannot be changed unless you are using a custom update site.
10. Enter the credentials used to access the fingerprint update website. These are the
username and password credentials you defined when you created an Extranet
account at ExtremeNetworks.com.
11. If your network is protected by a firewall, configure proxy server settings to use
when accessing the website. In the Proxy field, select Use Proxy or Use Proxy with
Credentials and enter your proxy server address and port ID. (Consult your network
administrator for this information.) If your proxy server requires authentication,
enter the proxy username and password credentials. The credentials you add here
must match the credentials configured on the proxy server.
12. Click Save.
13. If you did not select the Enforce Updates checkbox, enforce to push the changes to
your engines when the update is complete.
Related Information
l ExtremeAnalytics tab