User's Guide

Updating Fingerprints
162 of 218
3. Click the Menu icon ( ) and select Update Fingerprints. If you have already
configured your Fingerprint Update settings, the update is performed immediately.
If you have not configured your settings, the Fingerprint Update window opens.
a. Leave the Interval selection as Not Scheduled.
b. Select the Enforce Updates checkbox to automatically update fingerprints on
all engines. Not selecting this checkbox requires you to update each engine
manually.
c. The Update Site field displays the default path to the official fingerprint update
site. Typically, this field does change unless for security reasons the system
does not have access to the internet and an internal update site must be used.
d. The Update Site Port is the port on the update site to which the update
connects. The port cannot be changed unless you are using a custom update
site.
e. Enter the credentials used to access the fingerprint update website. These are
the username and password credentials you defined when you created an
Extranet account at ExtremeNetworks.com.
f. If your network is protected by a firewall, you need to configure proxy server
settings to use when accessing the website. In the Proxy field, select Use Proxy
or Use Proxy with Credentials and enter your proxy server address and port ID.
(Consult your network administrator for this information.) If your proxy server
requires authentication, enter the proxy username and password credentials.
The credentials you add here must match the credentials configured on the