Release Notes

3. Known Issues and Vulnerabilities Addressed
37 of 69
Tracking SNMP PDU errors was confusing. To address
this, the following changes were made:
l Capture SNMP PDU error details by IP.
l Use List of IPs and check SnmpTrace in Configure Network
Monitor Diagnostics.
l Reset the view to start.
01863719
Alias information was missing from Endpoint Locations after
importing them from a CSV file.
01874421
01936119
Functions that heavily utilize SNMP, such as device statistics
collection and policy enforcement, can take excessive time to
complete.
1900346
1910244
1928480
Links for VSP and ERS devices included in a map were not
changing to red when the port had a Status of Down.
------
Adding a device to the Network > Device > User Device Groups
was slow. Usability improvements were added to the User Device
Groups selection dialog, including tree state persistence, search
filtering, and a better initial layout.
------
VLANs in the Policy Egress tab that are not used in a role or rule
were not displaying in the Role/Service Usage dialog.
1878530
Selecting or deselecting the Enable Network Monitor Cache
checkbox was not working properly and the Save button was not
enabled after making changes to the options on the tab.
------
ExtremeXOS devices running the following firmware versions
were not displaying Fabric Attach settings correctly in Fabric
Manager:
l 22.5.1.7-patch1-*
l 22.5.1.7-patch2-5 (last one – patch2-5 and later if any)
l 22.5.1.7-patch5-*
l 22.5.1.7-patch6-*
l 22.6.1.4-patch2-2 and later
l 22.6.1.4-patch3-*
l 22.7
l 30.*
------