Release Notes

3. Known Issues and Vulnerabilities Addressed
31 of 69
Importing a policy from an ExtremeCloud Appliance in to
Extreme Management Center Policy was incorrectly setting the
roles' default access control to permit when the actual
configuration on the device was containing to a VLAN.
1900506
The Access Control Configuration Evaluation Tool was not
selecting the current NAC Configuration, AAA Configuration, and
AAA Overwrite in the launch dialog when selecting an end
system.
------
The Refresh (Rediscover) menu on the ports panel was not re-
discovering policy specific supported features, which should
occur when the view is shown in the context of the Policy tab in
Extreme Management Center.
01908087
Enforcing the PVI VLAN to an ExtremeXOS device failed when
changing the VID associated to that VLAN in the device’s PVI
island, or when moving the device from one island to another
with a different VID.
01916898
Retrieving sponsors using the GIM application when the LDAP
Configuration User Search Root was not available in the
configured search DN caused an error to occur.
01897483
01947122
Access Control Policy Mapping editor window was not sized
correctly.
Sorting some Access Control Policy Mapping table columns were
throwing exceptions if any values were empty.
01956869
3.4 Known Issues Addressed in 8.4.0.116
Extreme Management Center Issues Addressed ID
When setting the Global authentication configurations for a
device, the default option was Disable authentication on
Interswitch links. Now, for the Port Authentication Status window,
the default option is now Disable authentication on all ports.
01883054
An error message was displayed when Ekahau maps with a
customer wall type were imported.
01741222
In Fabric Manager, an unauthorized user entry was appearing in
the .ssh->authorized_keys folder.
01909821