Installation Guide
Table Of Contents
- Table of Contents
- About This Guide
- Engine Overview and Setup
- Configuration
- Reinstalling Engine Software
- Product Regulatory and Compliance Information
Configuring the ExtremeAnalytics Engine
25 of 39
Please enter the hour of day [09]:
Please enter the minutes [34]:
Please enter the seconds [08]:
17. In the Use UTC screen, select whether you want the system clock to be set to use
UTC.
==========================================================
======
Use UTC
==========================================================
======
The system clock can be set to use UTC. Specifying no for using UTC,
sets the hardware clock using localtime.
==========================================================
======
Do you want to use UTC (y/n) [n]?
18. In the Set Time Zone screen, select the appropriate time zone and press [Enter].
==========================================================
======
Set Time Zone
==========================================================
======
You will now be asked to enter the time zone information for this
system. Available time zones are stored in files in the
/usr/share/zoneinfo directory. Please select from one of the following
example time zones:
1. US Eastern
2. US Central
3. US Mountain
4. US Pacific
5. Other - Shows a graphical list
==========================================================
======
Enter selection [1]:
19. The Modify Settings screen summarizes the settings you have entered and provides
an opportunity to modify the settings, if desired. Enter 0 to accept the settings.