Installation Guide

Configuring the ExtremeAnalytics Engine
22 of 39
l Name: eth4
l Address: 10.54.211.116
l Netmask: 255.255.255.0
l Gateway: 10.54.211.1
l Name: eth5
l Address: 10.54.222.117
l Netmask: 255.255.255.0
l Gateway: 10.54.222.1
6. GRE tunnels:
l 10.54.211.116/10.54.1.116
l 10.54.222.117/10.54.2.117
12. In the SNMP Configuration screen, type the requested information for each line and
press [Enter].
==========================================================
======
SNMP Configuration
==========================================================
====== The following information will be used to configure SNMP
management of this device. The SNMP information entered here must
be used to contact this device with remote management applications
such as Extreme Management Center Console.
==========================================================
======
Please enter the SNMP user name [snmpuser]:
Please enter the SNMP authentication credential [snmpauthcred]:
Please enter the SNMP privacy credential [snmpprivcred]:
13. A summary screen appears asking you to accept your SNMP Configuration settings.
Enter 0 to accept the settings.
==========================================================
======
SNMP Configuration