Installation Guide

Configuring the ExtremeAnalytics Engine
17 of 39
Would you like to set a root password (y/n) [y]?
Note: You must set a new root password. This new root password will
be used by the initial user when logging in to the ExtremeAnalytics
application.
3. Enter y to set the new root password.
4. Press [Enter] and enter the new password as prompted.
Enter new UNIX password:
Retype new UNIX password:
Password updated successfully.
The ExtremeAnalytics Engine Deployment screen appears.
5. Select the deployment mode that matches your network environment.
The default deployment mode is 3.
==========================================================
====== ExtremeAnalytics Engine Deployment Modes
==========================================================
======
This engine supports multiple deployment modes to suit different
network environments and connectivity characteristics. Please select a
deployment mode below that best fits your requirements.
0. Single Interface - A single interface is used for both management
and monitoring traffic. Suitable for feeds from XOS/VOSS/SLX
switches.
1. Single Interface With Tunnel - A single interface is used for both
management and monitoring traffic. A GRE Tunnel will be configured
for traffic monitoring. Suitable for feeds from Coreflow switches.
2. Interface Mirrored - Separate interfaces are configured for
management and monitoring traffic. The monitoring interface will put
into tap mode for traffic monitoring. Suitable for feeds from
XOS/VOSS/SLX switches.
3. Interface Tunnel Mirrored - Separate interfaces are configured for
management and monitoring traffic. The monitoring interface will get