Installation Guide

Upgrading ExtremeAnalytics Engine Software
64 of 65
the login prompt in the Console tab:
/usr/postinstall/dateconfig
This will start the date and time configuration script and allow you to change the
settings.
Changing the ExtremeAnalytics Server IP Address
To change the IP address of the ExtremeAnalytics server, enter the following
command at the login prompt in the Console tab:
/opt/appid/configMgmtIP <IP address>
Then, start using the new ExtremeAnalytics server by typing: appidctl
restart.
Changing the Web Service Credentials
The Web Service credentials provide access to the ExtremeAnalytics Appliance
Administration web page and the web services interface for the
ExtremeAnalytics engine. Engines are shipped with a preconfigured default
password.
If you have changed the credentials in the Analytics tab and then install a new
engine that is using the default password, you will not be able to monitor or
enforce to the new engine until you change the password on the engine using
this command. The credentials you enter on the engine must match the
credentials specified in the Web Credentials section in Analytics > Configuration
> Configuration.
To change Web Service credentials, enter the following command at the login
prompt in the Console tab:
/opt/appid/configWebCredentials <username> <password>
Then, restart the engine by typing: appidctl restart
Upgrading ExtremeAnalytics Engine Software
Upgrades to the Extreme Management Center engine software will be made
available from the Network Management Suite (NMS) Download webpage.