Installation Guide

Configuring the ExtremeAnalytics Engine
55 of 65
The following example shows the Confirm Network Settings screen for
deployment mode 3.
==========================================================
Confirm Network Settings
==========================================================
These are the settings you have entered. Enter 0 or any
key other than a
valid selection to continue. If you need to make a change,
enter the
appropriate number now or run the
/usr/postinstall/dnetconfig script at a
later time.
==========================================================
0. Accept settings and continue
1. Hostname: pv88
2. Deployment Mode: Dual Interface Tunnel Mirrored
3. Management Interface Configuration (eth0):
Address: 10.54.184.88
Netmask: 255.255.255.0
Gateway: 10.54.184.1
Nameserver: 10.54.188.120
Domain name: nac2003.com
4. NIS Server/Domain: Not Configured
5. Mirror Interface Configuration:
Name: eth4
Address: 10.54.211.116
Netmask: 255.255.255.0
Gateway: 10.54.211.1
Name: eth5
Address: 10.54.222.117
Netmask: 255.255.255.0
Gateway: 10.54.222.1
6. GRE tunnels: 10.54.211.116/10.54.1.116
10.54.222.117/10.54.2.117
12. The SNMP Configuration screen appears. For each line, enter the requested
information and press
[Enter].
==========================================================