Installation Guide
Table Of Contents
- Table of Contents
- Engine Deployment
- Extreme Management Center Engine Configuration
- Pre-Configuration Tasks
- Configuring the Extreme Management Center Engine
- Launching Extreme Management Center Applications
- Restoring a Database from a Windows Server to the Engine
- Changing Extreme Management Center Engine Settings
- Upgrading Extreme Management Center Engine Software
- Reinstalling Extreme Management Center Appliance Software
- ExtremeControl Engine Configuration
- ExtremeAnalytics Engine Configuration
Configuring the ExtremeControl Engine
41 of 65
Set Time Zone
==========================================================
======
You will now be asked to enter the time zone information for this
system.
Available time zones are stored in files in the /usr/share/zoneinfo
directory.
Please select from one of the following example time zones:
1. US Eastern
2. US Central
3. US Mountain
4. US Pacific
5. Other - Shows a graphical list
==========================================================
======
Enter selection [1]:
11. In the Current Appliance Configuration screen, review the current settings and press
[Enter] to continue.
==========================================================
======
Current Appliance Configuration
==========================================================
======
ExtremeControl Gateway Configuration:
Host Info: <hostname>/<IP address>/<netmask>
Gateway/Name Server/Domain: <gateway>/<dns server>/<domain>
SNMP User/Auth/Privacy:snmpuser/snmpauthcred/snmpprivcred
Extreme Management Center Server IP: <ECC server ip>
Press [enter] to continue:
In the Appliance Network Configuration Complete screen, you can accept the
current configuration or modify the settings.
==============================================================
==
Appliance Network Configuration Complete
==============================================================
==