Installation Guide

Configuring the ExtremeControl Engine
38 of 65
4. In the ExtremeControl engine Configuration screen, enter the requested
configuration information for each line and press [Enter].
==========================================================
======
ExtremeControl Configuration
==========================================================
======
Enter the hostname for the appliance [nacappliance]:
Enter the IP address for <hostname> (Required):
Enter the IP netmask [255.255.255.0]:
Enter the gateway address [192.168.2.1]:
Enter the IP address of the name server (Optional):
Enter the domain name for <hostname> (Optional):
Enter the IP address of the Server (Required):
5. In the SNMP Configuration screen, enter the requested information for each line and
press [Enter].
==========================================================
======
SNMP Configuration
==========================================================
======
The following information will be used to configure SNMP
management of this device. The SNMP information entered here must
be used to contact this device with remote management applications
such as Extreme Management Center Console.
==========================================================
======
Please enter the SNMP user name [snmpuser]:
Please enter the SNMP authentication credential [snmpauthcred]:
Please enter the SNMP privacy credential [snmpprivcred]:
6. In the Configure Date and Time Settings screen, select whether you want to use an
external Network Time Protocol (NTP) server. Enter y to use NTP, and enter your
NTP server IP address(es). Enter n to configure the date and time manually and
proceed to step 8.
==========================================================
======