Installation Guide

Launching Extreme Management Center Applications
30 of 65
Enter selection [0]:
The Extreme Management Center application software is automatically installed.
This could take a few minutes. When you see the following screen, configuration
is complete.
==============================================================
===
Extreme Networks - Extreme Management Center Suite Appliance - Setup
Complete
==============================================================
===
Setup of the Extreme Management Center Appliance is now complete. The
appliance is now operational and ready to accept remote connections.
Details of the installation are located in the /var/log/install directory.
==============================================================
===
Note: After you have completed the configuration, it is important to take a
snapshot of your engine configuration to be used in the event an engine image
reinstall is required. For instructions on how to take a snapshot, see your vSphere
client documentation.
Launching Extreme Management Center
Applications
Now that you have configured the Extreme Management Center virtual engine,
you are ready to access the Extreme Management Center Launch Page and run
the Extreme Management Center applications from a remote client machine.
1. Open a browser window on the remote client machine and enter the Extreme
Management Center Launch page URL in the following format:
http://<servername>:8080/
where <servername> is the Extreme Management Center virtual engine IP
address or hostname, and 8080 is the required port number. For example,
http://10.20.30.40:8080/
The Extreme Management Center Launch Page opens.