Installation Guide
Table Of Contents
- Table of Contents
- Engine Deployment
- Extreme Management Center Engine Configuration
- Pre-Configuration Tasks
- Configuring the Extreme Management Center Engine
- Launching Extreme Management Center Applications
- Restoring a Database from a Windows Server to the Engine
- Changing Extreme Management Center Engine Settings
- Upgrading Extreme Management Center Engine Software
- Reinstalling Extreme Management Center Appliance Software
- ExtremeControl Engine Configuration
- ExtremeAnalytics Engine Configuration
Deploying the Virtual Engine on a VMware ESX Server
13 of 65
A login prompt is displayed on the right-panel Console tab once the virtual
machine completes its boot process,
You are now ready to begin configuring the engine. Refer to the appropriate
chapter for your virtual engine configuration instructions.
l If you are configuring an Extreme Management Center virtual engine, see Extreme
Management Center Engine Configuration.
l If you are configuring an ExtremeControl virtual engine, see ExtremeControl Engine
Configuration.
l If you are configuring an ExtremeAnalytics virtual engine, see ExtremeAnalytics
Engine Configuration.
Shutting Down the Engine
To properly shut down the virtual engine, enter the following command at the
login prompt in the vSphere client Console tab:
poweroff
This shuts down the engine and updates the vSphere client with the new engine
state.