Installation Guide

FIGURE 4 Select networks
TABLE 6 Select networks
Source Network Destination Network
EgressNetwork For sending packets post-processing.
Select your management network as the Destination Network.
MgmtNetwork Select your management network as the Destination Network.
TestIntfNetwork For sending a test pcap to the Rx interface.
FlowExportNetwork For exporting IPFIX metadata.
Select your management network as the Destination Network.
IngressNetwork For receiving ingress packets.
i) Click Next.
The Customize template page appears.
Enter appropriate values for the following properties:
TABLE 7 Customize template
Property Description
Host Network IP Address This the management IP address. If this IP address is not provided, it is assigned by the DHCP server.
Host Network Prex Prex length, which is the number of bits set in the subnet mask.
For example: If the subnet mask is 255.255.255.0, the prex length is 24 bits.
Host Network Default Gateway This is the default gateway.
Host Name Hostname for the VM.
Virtual Sensor installation using vSphere Web Client
ExtremeAnalytics Virtual Sensor 1.0.0 Software Installation Guide
9036611-00 19