Specifications
3
WWW.EXTREMENETWORKS.COM
Fabric Connect VPN Software
When enabled with Fabric Connect VPN software, the
ExtremeAccess Platform 1400 Series supports full-feature
Extreme Fabric Connect capabilities. Based on an extended
implementation of the Shortest Path Bridging (SPB)
standards of IEEE 802.1aq and IETF RFC 6329, Fabric
Connect oers a virtualized network that simplifies network
provisioning and reduces the strain on network and IT
personnel. Benefits include:
• Eliminates need to configure network-wide VLANs
• Replaces legacy protocols with a single unified protocol
• Removes the risk of network loops
• Delivers an edge-only provisioning model that
seamlessly integrates with orchestration
and automation
• Supports both L2 and L3 virtualization
Specific Fabric Connect features supported on the
ExtremeAccess Platform with the Fabric Connect VPN
software include: L2 Virtual Service Networks (VSNs),
Layer 3 Virtual Service Networks, Inter-VSN Routing, IPv4
Shortcuts, and Fabric Extend Tunneling.
Advanced Layer 3 Services
The ExtremeAccess Platform 1400 with Fabric Connect
VPN software also supports Layer 3 services. This enables it
to address IP routing requirements, in addition to its fabric-
based services. Layer 3 services include IPv4 dynamic and
static routing, as well as Border Gateway Protocol with
support for RIPv1/2, OSPFv2, BGPv4 and VRF.
Management
The ExtremeAccess Platform 1400 Series can be managed
in a variety of ways. Simple on-box management functions
are delivered by a web-based GUI and a generic CLI is
available for manual configuration. Centralized management
can be done via Extreme Management Center (XMC) which
provides a comprehensive unified management capability.
Software and Licensing
Fabric Connect VPN (FCVPN) software hosted on the
ExtremeAccess Platform 1400 is oered as a “term-based”
(or subscription) license and is available in 1-year, 3-year
and 5-year terms. Each FCVPN license consists of:
1. Right-to-Use license for the purchased term
2. Software Services with GTAC support for the
purchased term.
FCVPN Software Services are further available in three (3)
service tiers, including ExtremeWorks (EW), PartnerWorks
(PW) and ExtremeWorks Premier (EWP) options.
The FCVPN license is also available in two (2) bandwidth
tiers to address varying WAN throughput needs:
1. 100 Mbps tier – available on both ExtremeAccess
Platform 1440 and 1480 models
2. 500 Mbps tier – available only on Extreme Access
Platform 1480 model
WAN bandwidth refers to the aggregate WAN throughput
on the specific ExtremeAccess Platform hardware appliance.
Ordering Notes
A Fabric Connect VPN (FCVPN) license is a mandatory
attach for each ExtremeAccess Platform 1400 hardware
appliance. The ExtremeAccess Platform appliance itself
includes the base system along with external 12V/60W
power adaptor and fan. Power cords and transceiver/optics
are not included and must be ordered separately.
Warranty
The ExtremeAccess Platform hardware is covered under
Extreme's 1-year warranty policy. For details, please visit:
http://extremenetworks.com/support/policies. Please
note that the warranty is for the hardware only. Software
services are bundled and provided as part of the Fabric
Connect VPN (FCVPN) order code.