Reference Guide

Figure 6: Basic tab
The Basic Settings parameters are used to determine the O-Channel Scanning (OCS) aggressiveness
used by Smart RF for monitoring and configuration. Changing the Smart RF Sensitivity modifies values
in the Scanning Configuration, Neighbor Recovery, Interference Recovery, and Coverage Hole
Recovery screens. A best practice is to use the default Medium Sensitivity. It has been proven to work
well in retail, oce, and warehouse environments. If customization is required, base your customizations
on the Medium Sensitivity values.
The additional Basic Settings parameters determine if the Smart RF Policy is enabled and which
Recovery features are enabled. Deciding which Recovery features to enable is determined by the AP
placement and overlapping coverage provided at each site.
Note
Recovery features can operate correctly only if adequate coverage and overlap has been
designed into the system. A site survey and proper deployment for Smart RF is required for
Recovery to work correctly.
Note
If the Smart RF Policy is disabled but assigned to an RF Domain, the access point radio
channels are assigned randomly from the defined channel settings in the Channel and Power
Configuration screen. The transmit power for each radio is set to the maximum permitted
value.
Smart RF Policy Basic Configuration
Extreme Campus Controller Smart RF Reference Guide for version 5.46.02 15