Installation Guide
Table Of Contents
- Table of Contents
- Preface
- Overview
- Virtual Appliance Deployment
- Virtual Appliance Configuration
- Access the Virtual Appliance Console
- Configure the VE6120/VE6125 using the Basic Configuration Wizard
- Set up the VE6120/VE6125 Appliance using the Basic Configuration Wizard
- Upgrade the VE6120/VE6125 Software
- Set Up the Virtual Appliance to Accept USB Flash Drives
- Generate and Install the Activation Package
- Subscription License
- Permanent Capacity License
- Configure vSwitches for the Virtual Appliance
- Configure a Virtual Machine to Gain Networking Performance
- Shut Down and Restart a Virtual Machine
- Index
5. Select Add parameter to add an entry.
Figure 33: Configuration Parameters window
6. Set the following parameters in the Configuration Parameters window.
Table 7: Configuration parameters entries
Key Value
For Port 1:
• ethernet1.ctxPerDev
1
For Port 2:
• ethernet2.ctxPerDev
1
Note
The "X" in ethernetX.ctxPerDev command is replaced with the vNIC number.
Configure a Virtual Machine to Gain Networking
Performance
52 VE6120/VE6125 Virtual Appliances Installation Guide VMware® Platform for version 5.16.01