Installation Guide
Table Of Contents
- Table of Contents
- Preface
- Overview
- Virtual Appliance Deployment
- Virtual Appliance Configuration
- Access the Virtual Appliance Console
- Configure the VE6120/VE6125 using the Basic Configuration Wizard
- Set up the VE6120/VE6125 Appliance using the Basic Configuration Wizard
- Upgrade the VE6120/VE6125 Software
- Set Up the Virtual Appliance to Accept USB Flash Drives
- Generate and Install the Activation Package
- Subscription License
- Permanent Capacity License
- Configure vSwitches for the Virtual Appliance
- Configure a Virtual Machine to Gain Networking Performance
- Shut Down and Restart a Virtual Machine
- Index
Obtain an Apply a Capacity Key
About This Task
Procedure
1. Obtain a voucher from the Extreme Networks Support portal.
2. Log into the Extreme Networks Support portal to redeem the voucher.
The Extreme Networks Support portal presents the Capacity key.
3. On the Extreme Campus Controller, go to Admin > License.
4. Select the Permanent Capacity License link.
5. Next to the Licensed Capacity field, select the plus sign.
6. Copy and paste the Capacity key from the Extreme Networks Support portal to the Extreme
Campus Controller user interface.
7. Select Apply.
Results
Note
When using a Permanent Capacity License model, on Extreme Campus Controller, select the
Permanent Capacity License link. Your valid capacity limits are now displayed.
Obtain an Apply a Capacity Key Virtual Appliance Configuration
40 VE6120/VE6125 Virtual Appliances Installation Guide VMware® Platform for version 5.16.01