Installation Guide
Table Of Contents
- Table of Contents
- Preface
- Overview
- Virtual Appliance Deployment
- Virtual Appliance Configuration
- Access the Virtual Appliance Console
- Configure the VE6120/VE6125 using the Basic Configuration Wizard
- Set up the VE6120/VE6125 Appliance using the Basic Configuration Wizard
- Upgrade the VE6120/VE6125 Software
- Set Up the Virtual Appliance to Accept USB Flash Drives
- Generate and Install the Activation Package
- Subscription License
- Permanent Capacity License
- Configure vSwitches for the Virtual Appliance
- Configure a Virtual Machine to Gain Networking Performance
- Shut Down and Restart a Virtual Machine
- Index
5. To add the image file, select the plus icon.
Figure 15: Upgrade section
The Copy Upgrade Image window is displayed.
6. To copy an upgrade or backup image to Extreme Campus Controller, configure the following
parameters:
Image Type
Indicates the type of image
file used. Valid values are:
• Upgrade
• Backup
Destination
Destination of the uploaded image file:
• Local
• Flash (The Flash drive must be mounted.)
Upload Method
Method used to upload image file to appliance. Valid values are:
• HTTP — Indicates to upload from a local workstation.
• FTP — Indicates to upload from the corresponding server.
• SCP — Indicates to upload from the corresponding server.
When the Upload Method is FTP or SCP,
configure the server properties.
Copy Image from Local Drive
When the Upload Method is HTTP, drag image onto Extreme Campus Controller or select field to
navigate to local file directory.
Select Image
Due to a storage space limitation, Extreme Campus Controller limits the number of locally
available upgrade archives. If necessary, you can delete an older image before you upgrade to
the latest image. To delete an image fromExtreme Campus Controller, from the Select Image
field, select an image and select .
Upgrade the VE6120/VE6125 Software
Virtual Appliance Configuration
30 VE6120/VE6125 Virtual Appliances Installation Guide VMware® Platform for version 5.16.01