Installation Guide

Figure 12: VE6120's Command Line Interface (CLI)
Configure the VE6120/VE6125 using the Basic Configuration Wizard
The Extreme Campus Controller software provides a Basic Configuration Wizard that can help
administrators configure the minimum settings necessary to deploy a fully functioning VE6120/VE6125
appliance on a network.
Administrators can use the wizard to quickly configure the appliances for deployment, and then after
the installation is complete, continue to revise the configuration accordingly.
The wizard is automatically launched when an administrator logs on to the VE6120/VE6125 CLI for the
first time, including after the system has been reset to the factory default settings.
The configuration wizard prompts with a set of Yes or No questions. The default value is indicated in
parenthesis. To accept the default value, press Enter.
For more information about using the Basic Configuration Wizard, see Set up the VE6120/VE6125
Appliance using the Basic Configuration Wizard on page 25.
Set up the VE6120/VE6125 Appliance using the Basic
Configuration
Wizard
About This Task
After logging into the CLI of the VE6120/VE6125 Basic Configuration Wizard, you will be able to set it up
using a set of Yes or No commands.
Virtual Appliance
Configuration
Configure the VE6120/VE6125 using the Basic
Configuration Wizard
VE6120/VE6125 Virtual Appliances Installation Guide VMware® Platform for version 5.16.01 25