Installation Guide
Table Of Contents
- Table of Contents
- Preface
- Overview
- Virtual Appliance Deployment
- Virtual Appliance Configuration
- Access the Virtual Appliance Console
- Configure the VE6120/VE6125 using the Basic Configuration Wizard
- Set up the VE6120/VE6125 Appliance using the Basic Configuration Wizard
- Upgrade the VE6120/VE6125 Software
- Set Up the Virtual Appliance to Accept USB Flash Drives
- Generate and Install the Activation Package
- Subscription License
- Permanent Capacity License
- Configure vSwitches for the Virtual Appliance
- Configure a Virtual Machine to Gain Networking Performance
- Shut Down and Restart a Virtual Machine
- Index
4. After the Virtual Appliance has been started and completes its boot process, right-click the
appliance name, and from the drop-down menu, click Open Console.
Figure 11: Open Console option
The VE6120 Command Line Interface (CLI) opens in a new window.
5. Enter your login credentials.
Note
Click inside the console window once or twice to make the window interactive. If the
prompt is not visible, press [Enter].
• For User Name, enter admin.
• For Password, enter abc123.
You now are working in the VE6120's CLI.
Access the Virtual Appliance Console
Virtual Appliance Configuration
24 VE6120/VE6125 Virtual Appliances Installation Guide VMware® Platform for version 5.16.01