Installation Guide
Table Of Contents
- Table of Contents
- Preface
- Overview
- Virtual Appliance Deployment
- Virtual Appliance Configuration
- Access the Virtual Appliance Console
- Configure the VE6120/VE6125 using the Basic Configuration Wizard
- Set up the VE6120/VE6125 Appliance using the Basic Configuration Wizard
- Upgrade the VE6120/VE6125 Software
- Set Up the Virtual Appliance to Accept USB Flash Drives
- Generate and Install the Activation Package
- Subscription License
- Permanent Capacity License
- Configure vSwitches for the Virtual Appliance
- Configure a Virtual Machine to Gain Networking Performance
- Shut Down and Restart a Virtual Machine
- Index
7. On the Select networks screen, map the virtual appliance ports to the virtual networks that are
deployed on the host server. For each Source Network, select a corresponding Destination
Network.
Table 5: Network Selection
Source Network Destination Network/ Description
VM Network MGMT-63/Management port
Port 2 Internal 1
Port 1 450-P8
Select Next. The Ready to complete screen is displayed.
8. Review your configuration data in the Ready to complete screen, select Finish to finish your setup.
Figure 7: Ready to Complete screen
A progress bar is displayed in the Recent Tasks section.
Virtual Appliance Deployment
Install and Deploy the Virtual Appliance Image
VE6120/VE6125 Virtual Appliances Installation Guide VMware® Platform for version 5.16.01 19