Installation Guide
Table Of Contents
- Table of Contents
- Preface
- Overview
- Virtual Appliance Deployment
- Virtual Appliance Configuration
- Access the Virtual Appliance Console
- Configure the VE6120/VE6125 using the Basic Configuration Wizard
- Set up the VE6120/VE6125 Appliance using the Basic Configuration Wizard
- Upgrade the VE6120/VE6125 Software
- Set Up the Virtual Appliance to Accept USB Flash Drives
- Generate and Install the Activation Package
- Subscription License
- Permanent Capacity License
- Configure vSwitches for the Virtual Appliance
- Configure a Virtual Machine to Gain Networking Performance
- Shut Down and Restart a Virtual Machine
- Index
5. On the Review details screen, review the information and select Next.Select storage screen is
displayed.
Note
You can select Back to modify any of the previous settings.
Figure 6: Review details screen
6. On the Select storage screen:
a. Select virtual disk format as Thick provision. This is the default virtual disk format.
Note
Thick provision format allocates storage immediately. For more information on disk
storage, see Deployment Requirements on page 10.
b. Select your destination storage.
c. Select Next.
The Select networks screen is displayed.
Install and Deploy the Virtual Appliance Image
Virtual Appliance Deployment
18 VE6120/VE6125 Virtual Appliances Installation Guide VMware® Platform for version 5.16.01