Deployment Guide

ManualsBrandsExtreme Networks ManualsComputers & AccessoriesWired and wireless orchestration for campus and IoT networks

Table Of Contents

Table of Contents
Preface
- Conventions
  - Text Conventions
- Documentation and Training
- Send Feedback
- Help and Support
- AP Regulatory Information
About Extreme Campus Controller Deployment
- Deploying Extreme Campus Controller
- VE6120K, VE6125K Virtual Appliances
- VE6120H Virtual Appliance
- VE6120 Virtual Appliance
- VE6125 Virtual Appliance
- Supported Appliance Specifications
- Discovery and Registration
  - Discovery Process for APs and Adapters in a Centralized Site
    - Discovering Centralized Site APs and Adapters
  - Switch Discovery Process
    - Discovering Switches
    - Switch Discovery in an Availability Pair
- Sites
- Device Groups
Configuring DHCP, NPS, and DNS Services
- DHCP Service Configuration
  - Configuring DHCP on Windows Server 2012 R2
  - Configuring DHCP on a Red Hat Linux Server
    - Configuring DHCP Option 43 on a Linux Server
- Configuring the Extreme Campus Controller as an NPS Client
- NPS Service Configuration
  - Add a New Network Policy
    - Create Condition: Client IPv4 Addresses
    - Create Condition: Windows Groups
- DNS Service Configuration
  - Configuring DNS for Wireless AP Discovery
  - Configuring DNS on a Linux Server
- Configure Extreme Campus Controller for Local DHCP Management
  - Add a Physical Interface
  - Local DHCP Settings
Centralized Site with a Captive Portal
- Deployment Strategy
- Adding a Centralized Site with Device Group
- Configuring an Internal Captive Portal
- Specifying B@AC Network Topology
- Configuring a Captive Portal Network
- Working with Internal Captive Portal Engine Rules
- Editing Device Group Profile for Network and Role
- Creating Adoption Rules
Centralized Site with AAA Network
- Deployment Strategy
- Configuring a AAA Network
- Creating an Engine Rule
- Creating a Policy Role
- Applying a AAA Network and Role to the Device Group
Deploying a Mesh Network
- Deployment Strategy
- Mesh Point Network Settings
- Configure Device Groups for Mesh Point
- Advanced Configuration Profile and Mesh Device Settings
  - Profile Advanced Settings
  - Edit Mesh Device Settings
Configuring an External NAC Server for MBA and AAA Authentication
- Deployment Strategy
- Configuring the External NAC Server
- Network with Default Auth Role
  - Configuring an MBA Network
  - Configuring a AAA Network
- Network with Pass-Through External RADIUS
  - Configuring an MBA Network
  - Configuring a AAA Network
Manage RADIUS Servers for User Authentication
- RADIUS Settings
- Advanced RADIUS Settings
- Configure a Pass Through Rule
External Captive Portal on a Third-Party Server
- Firewall Friendly External Captive Portal Flow of Events
  - FF-ECP on Extreme Campus Controller
- Configure the Firewall
- Configure an External Captive Portal
- Understand Processing Performed by the ECP
  - The Redirection URL Sent from Extreme Campus Controller
    - Verifying the Signed Request
  - Compose the Login or Splash Screen Page
- Approve the Client
- Compose the Redirection Response Sending the Browser back to the Appliance
Access Control Rule Admin Portal Access
- Deployment Strategy
- Configure Access Control Group
  - Default Access Control Groups
- Configure Admin Access Policy Role
- Configure Access Control Rule
  - Default Access Control Rules
- Define Rule Precedence
Deploying Centralized Web Authentication
- Deployment Strategy
- CWA with ISE Deployment
- CWA with ExtremeControl Deployment
Deploying ExtremeCloud IQ - SE as an External Captive Portal
- Deployment Strategy
- Configuring an External Captive Portal Network
- Editing the Configuration Profile for Network and Roles
- Extreme Campus Controller Default Pass-Through Rule
- Adding Extreme Campus Controller as a Switch to ExtremeCloud IQ - Site Engine
- Editing the Unregistered Policy on ExtremeCloud IQ - Site Engine
- Editing the ExtremeCloud IQ - Site Engine Profile for Policy and Location-Based Services
Deploying an ExtremeGuest Captive Portal
- Deployment Strategy
- Configure an ExtremeGuest Server
- Configure an ExtremeGuest Captive Portal Network
- Configuration Settings on ExtremeGuest
Deploying Client Bridge
- Deployment Strategy
- AP Client Bridge
- Configure Client Bridge
Deploying an Availability Pair
- Deploying an Availability Pair
Deploying Universal APs
- Onboarding Universal APs — ExtremeCloud IQ, Extreme Campus Controller
Extreme Campus Controller Pair with ExtremeLocation and AirDefense
- Scenario Outline
- Deployment Strategy
- Configuring the Centralized Site with an AP3915 Profile
- Configuring ExtremeLocation
- Configuring AirDefense
ECP Local Authentication
- Scenario Outline
- Deployment Strategy
- Configuring External Captive Portal Network
- Editing the Device Group Profile for ECP Network
PHP External Captive Portal, Controller’s Firewall Friendly API
- net-auth.php
- login.php
- common_utilities.php
- crypt_aws_s4.php
- ffecp-config.php
Index
- A
- B
- C
- D
- E
- F
- L
- M
- N
- P
- R
- S
- T
- U
- W
- X

WPA2 Enterprise w/ RADIUS

Authentication Method

RADIUS

Primary RADIUS

IP Address of the External NAC added in Step 1.

Default Auth Role

Select a role other than Enterprise User.

Default VLAN

Select a Default VLAN. B@AP VLAN ID

Note

Both B@AP and B@AC are supported for NAC.

3. Select Save.

4. Create a policy rule.

Go to Onboard > Rules and conﬁgure the following parameters:

Location Group

Network: <name of your network>

Accept Policy

• To conﬁgure a Default Auth Role Policy, select Use Default Auth Role.

• To conﬁgure a Pass-Through External RADIUS Accept Policy, select Pass Through External

RADIUS.

5. Select Save.

On the NAC Manager:

6. Edit the rule you created on Extreme Campus Controller here.

Conﬁgure the following parameters:

Authentication Method

802.1x

End-System Group

Any

7. Select Save and enforce the NAC.

On Extreme Campus Controller:

8. Assign the network created previously and its Default Auth Role to a site and save.

• Go to Conﬁgure > Sites and select a site.

• Select the Device Groups tab and select a device group.

• Beside the Proﬁle ﬁeld, select

to edit the device group proﬁle.

• Go to the Networks tab and select the conﬁgured network.

• Go to the Roles tab and select the conﬁgured Default Auth Role.

Associate clients to the SSID of the Network, when prompted for the username and password, use the

username and password created with the New User. The external NAC server matches the rule you

created under New Rule and upon successful authentication sends an Access-Accept and a Filter-ID

Conﬁguring

an External NAC Server for MBA and AAA

Authentication Conﬁguring a AAA Network

Extreme Campus Controller Deployment Guide for version 5.46.03 85