Deployment Guide

Table 7: Interface Parameters (continued)
Field Description
FQDN Fully-Qualified Domain Name
DHCP Dynamic Host Configuration Protocol allows network
administrators to centrally manage and automate the
assignment of IP addresses on the corporate network. DHCP
sends a new IP address when a computer is plugged into a
dierent place in the network. The protocol supports static or
dynamic IP addresses and can dynamically reconfigure
networks in which there are more computers than there are
available IP addresses. Valid values are:
• None
• Local Server. Indicates that the Extreme Campus Controller
is used for managing IP addresses.
Related Topics
Local DHCP Settings on page 53
Local DHCP Settings
Configure the following Local DHCP settings:
Domain Name
The name of the domain that is allocated for the IP address range.
Lease (Seconds)
The DHCP Lease represents the time period between when a device obtains the IP address and the
time the IP address expires. When the Lease expires, the device releases the IP address and Extreme
Campus Controller issues a new one. Default Lease is 36000 seconds, Default Max Value is 2592000
seconds. Devices can request a lease value.
DNS Servers
Primary IP address for the DNS (Domain Name Server).
WINS Servers
IP address of the WINS (Windows Internet Name Service) server.
Gateway
Gateway IP address.
Address Range
IP address range. Value is prompted by the subnet IP address that you configured.
Exclusions
(Available from the VLAN configuration) A range or single IP address that is excluded from the
greater Address Range. Save your VLAN configuration before selecting Exclusions to configure IP
address exclusions.
Configuring
DHCP, NPS, and DNS Services Local DHCP Settings
Extreme Campus Controller Deployment Guide for version 5.46.03 53