Release Notes

Extreme Campus Controller Customer Release Notes
12/16/2021 P/N: 9037154-02 Subject to Change Without Notice Page: 2 of 18
F0615-O
Enhancements in 05.46.03.0016
Added support for adoption of AP5xx-1/AP4xx-1/AP3xx-1. All functionality from similar
11ax AP models is supported, except for the following features:
- No support for Bluetooth Low Energy (BLE) (iBeacon, Eddystone) , Zigbee, or Thread
Gateway
- No 160 MHz operation in 5 GHz radio
XCC-1960
Introduced support for WPA3-Personal SAE Hash-to-Element (H2E) wireless encryption
for AP4000 models.
XCC-2145
Exposed configuration for RADIUS accounting mode selection as Broadcast vs Failover. XCC-1834
Added warning of impending license expiration in the System Health Widget. XCC-2045
Added the ability to override the default WLAN assignment to client ports for individual
APs.
XCC-1937
Changes in 05.46.03.0016 I.D
Channel 103 (in 6 GHz band: 103e/80Mhz) is now available for direct manual assignment
for AP4000 devices.
XCC-2048
Improved Floorplan representation of channel coverage for 6 GHz operation. The channel
range was increased to 233 for 6 GHz radio.
XCC-1998
Updated Power Source column on AP List for clarity. Possible vaues are: DC, AF, AT. XCC-2052
Enhancements in 05.46.02.0019
Enforced compatibility check for 6 GHz operation, in accordance with WFA 6E rules. WFA
6E dictates that WPA3 and OWE are minimum required security options for network
operation. Network definition will identify compliant networks. Network assignment to
Radio 3 for 6 GHz restricts assignment to only compliant networks.
XCC-1649
Added option to enable Fast Initial Link Setup (FILS) for in-channel service advertisement
on 6 GHz operation. Disabled by default in accordance with WFA requirements.
XCC-1774
Enhanced Site Floorplan visualization to represent Channel and RF coverage for 6 GHz
operation.
XCC-1645
Deprecated "AUTO" configuration option for SmartRF configuration. Adjusted algorithm to
use requested width as designation for desired bandwidth. Algorithm will try to resolve
channel/power plan at desired width. SmartRF automatically adjusts to lower widths when
unable to fulfill the requested width.
XCC-1794
Enhanced AAA definitions to allow definition of threshold values to cap repetitive
authentication attempts by failed clients. Threshold can hold off clients that exceed
threshold values of authentication attempts in time period from re-authenticating for a
given timeout period, thus reducing load on backend authentication servers.
XCC-1484
Enhanced SmartRF Neighbor reports to display SSID along with BSSID for detected
networks.
XCC-1335
Added a new Best Practices Assessment of Poll timeout for mesh nodes. XCC-1751
Provided visual notification alert in application banner of impending expiration of
subscriptions within 90 days.
XCC-1788