User's Guide

Table Of Contents

Table 11: Radio Conﬁguration and support for AP3xx (continued)

AP Model Radio Conﬁguration

◦ Mode 3 — 5GHz lower band service radio and 5GHz

upper band service radio

• Internet of things (IoT) devices are supported.

Note: The AP310i-1 does not support IoT and the 5GHz radio

does not support 160MHz operation.

Related Topics

Understand Radio Mode on page 134

Radio as a Sensor on page 138

Professional Install Settings on page 204

Universal AP Operational Modes on page 16

Support for ExtremeWireless AP4xx Access Points

Extreme Campus Controller supports ExtremeWireless™ AP410i/e, AP410i-1, AP460i/e, AP410C, and

AP460C, AP460S6C, or AP460S12C access points.

The APxxxC models are Universal APs that support two operating modes: on premise and cloud-

enabled. For more information, see Universal AP Operational Modes on page 16.

The access points feature built-in dual-band radios, two band-locked radios, up to eight Wi-Fi internal

or external antennas, and one Bluetooth Low Energy (BLE) antenna.

Note

All AP4xxx support internet of things (IoT) devices.

The AP4xx series access points oer three radios:

• Radio 1 — WLAN Service

◦ AP410i/e and AP460i/e (2.4 GHz)

◦ AP4xxC — (2.4/5.0 GHz) supports (a/n/ac/ax) and (a/n/ac).

• Radio 2 (5.0 GHz) — WLAN Service (For all models).

• Radio 3 — Dedicated sensor

Note

The AP410i-1 does not support IoT and the 5GHz radio does not support 160MHz operation.