User's Guide

• Filters. Click to display filter options. Filter the floor map by AP attributes to focus on network
attributes that need attention.
• Options. Click to display the following options:
◦ Select Badges. Opens the AP Badge Configuration window.
◦ Show/Hide Badges. Toggles the AP badge display on the active floor plan.
◦ Show/Hide Grid. Toggles grid line display on the active floor plan.
◦ Show/Hide Cameras. Display or hide camera APs. Camera APs are displayed with a circular icon.
◦ Show Orientations. Show AP orientation on the active map. Wall-mounted APs display a black
triangle on the map indicating their orientation.
◦ Show/Hide Zones. Display or hide zones that are configured for Location Engine area change
event support.
Related Topics
Placing Devices on page 181
Configuring AP Orientation on page 182
Configuring Floor Plan Zones on page 182
Configuring Camera AP Angle on page 182
Assigning Badges
Badges display real-time statistics that can be configured for each AP. If a metric is not assigned to a
badge position, it is not shown on the user interface. By default, all the badges are assigned to an AP.
The following metrics can be assigned to badges:
• RSS. Filter range: [-100, -10] dBm
• SNR. Filter range: [0, 50] dB
• TX Power. Filter range: [0, 30] dBm
• Radio Status
◦ Green. Radio is on and providing service.
◦ Red. Radio is on but not providing service.
◦ Blue. Radio is o.
• Channel. Filter range: [1, 200]
• Clients. Filter range: [0, 200]
• Throughput.
◦ Select min/max for the filter range. Available ranges:
▪ [0, 1000] Kbps
▪ [1, 50] Mbps
▪ [50, 1000] Mbps
▪ [1, 10] Gbps
◦ Delta throughput since last statistics collection.
• Retries:
◦ Filter range: [0, 100] %
◦ Delta retries since last stats collection
Monitor
Floor Plan View
Extreme Campus Controller User Guide for version 5.46.03 53