User's Guide

Configuring a Floor Plan on page 174
Viewing a Floor Plan
After the floor plan is configured, view it from a selected site's dashboard. The floor plan represents
placed devices and associated badges that show configuration and performance data for the device.
From the Floor Plans view, you can toggle between floors, filter data, and further fine-tune the map
display.
To access Floor Plans view, go to Monitor > Sites, select a sight and select Floor Plans.
If one or more floor plans exist, available floor plans display in the right-side pane.
Here are a few things you can do with a floor plan:
• To search for devices:
◦ Select the search icon
.
◦ Select on the search field and select device from the drop-down list.
• To zoom in and out, do one of the following:
◦ Select to zoom in.
◦ Select to zoom out.
◦ Double-click on the map to zoom in. Use the mouse scroll wheel to zoom out.
◦ Select the map and use the mouse scroll wheel to zoom in and out.
• Check device status:
Table 9: Device Status from the Floor Plans View
Status Description
AP is in-service, operating.
In-service, trouble.
Critical. Indicates that Extreme Campus Controller cannot
communicate with the AP.
Unknown. AP is unknown to the displayed floor plan based on
floor plan filter settings. Typically occurs when the device
group for the AP is not selected.
Unknown. The AP serial number is unknown to the floor plan.
Typically occurs when you import a floor plan with AP place
holders. For more information, see Use Case: Importing A Floor
Plan with Unknown APs on page 177.
Sensor device
Switch
Monitor Floor Plan View
Extreme Campus Controller User Guide for version 5.46.03 51