User's Guide

Table 94 describes how to configure SNMP credentials on Extreme Campus Controller.
Table 94: SNMP Configuration Parameters
Field Description
SNMP Select the SNMP version to enable. Valid values are:
• SNMPv3
• SNMPv2c
The displayed parameters depend on the SNMP version that is
enabled.
Communities (SNMPv2c) Select Add to add a community.
Provide a community name and access level:
• Private Community — Default community for read-only
SNMP communication.
• Public Community — Default community for write SNMP
communication. Available for full Extreme Campus
Controller environment support only.
SNMPv3 Users Select Add to add users for access to Extreme Campus
Controller through SNMP. These values are typically types of
users that are configured for access:
• No Authentication/No Privacy
• Authentication/No Privacy
• Authentication/Privacy
You can also edit user credentials and delete users.
SNMP Notifications Select Add to configure the IP address and port of the server
that will receive SNMP messages.
You can also edit and delete notifications.
Available for full Extreme Campus Controller environment support only.
Context String (SNMPv3) A description of the SNMP context. An SNMP context is
information that you can access through the SNMP agent. A
device can support multiple contexts.
Engine ID The SNMPv3 engine ID for the appliance running the SNMP
agent. The Engine ID must be from 5 to 32 characters long.
Forward Traps Specify the level of the messages to be trapped. Valid values
are:
• None
• Information
• Minor
• Major
• Critical
Related Topics
Working with SNMPv2 Communities on page 373
Working with SNMPv3 Users on page 373
Working with SNMP Notifications on page 374
Settings on page 371
MAC Format on page 374
Settings
Administration
372 Extreme Campus Controller User Guide for version 5.46.03