User's Guide

Table Of Contents

Manually conﬁgure time zone settings for your network. Search for a time zone, and click Save to

manually change system date and time.

Network Time

Check NTP/SNTP to conﬁgure servers for Network Time Protocol (NTP) or Simple Network Time

Protocol (SNTP).

NTP and SNTP are Internet Standard Protocols that assures accurate synchronization to the millisecond

of computer clock times in a network of computers.

NTP/SNTP Reachable

An icon indicates if the NTP/SNTP server is reachable:

• Green. The server is reachable.

• Red. The server is not reachable. Check your NTP/SNTP server settings. Extreme Campus Controller

has lost connectivity.

Note

Network Time settings on each appliance of an availability pair must be identical for the

conﬁguration update process to be successful.

Enable Cloud Visibility

To enable Cloud Visibility:

1. Go to Administration > System > Cloud.

2. Select Enable.

The MAC address and serial number for the Extreme Campus Controller are displayed. These values

are required as part of the onboarding registration of the appliance in ExtremeCloud IQ.

3. Provide the fully-qualiﬁed host name of the ExtremeCloud IQ server.

This information is available from your ExtremeCloud IQ account. For example:

<RDC name>-cw.extremecloudiq.com where:

• <RDC name> is your Regional Data Center (RDC) information available under About

ExtremeCloud IQ.

• -cw indicates an Extreme Campus Controller appliance.

• .extremecloudiq.com is the ExtremeCloud IQ host address.

4. Select Save.

Note

The reporting interval is 5 minutes.