User's Guide
Table Of Contents
- Table of Contents
- Preface
- Welcome to Extreme Campus Controller
- Dashboard
- Monitor
- Sites List
- Device List
- Access Points List
- Smart RF Widgets
- Switches List
- Networks List
- Clients
- Policy
- Configure
- Network Configuration Steps
- Sites
- Add a Site
- Modifying Site Configuration
- Site Location
- Adding Device Groups to a Site
- Add or Edit a Configuration Profile
- Associated Profiles
- Associated Networks
- Mesh Point Profile Configuration
- Configure Client Bridge
- Understand Radio Mode
- Radio as a Sensor
- Advanced AP Radio Settings
- VLAN Profile Settings
- AirDefense Profile Settings
- ExtremeLocation Profile Settings
- IoT Profile Settings
- Positioning Profile Settings
- Analytics Profile Settings
- RTLS Settings
- Advanced Configuration Profile Settings
- Configuring RF Management
- Configuring a Floor Plan
- Advanced Tab
- Devices
- Networks
- Policy
- Automatic Adoption
- ExtremeGuest Integration
- AAA RADIUS Authentication
- Onboard
- Onboard AAA Authentication
- Manage Captive Portal
- Manage Access Control Groups
- Access Control Rules
- Tools
- Administration
- System Configuration
- Manage Administrator Accounts
- Extreme Campus Controller Applications
- Product License
- Glossary
- Index
Table 89: Interface Parameters (continued)
Field Description
VLAN ID ID for the virtual network.
Tagged Indicates if the interface tags trac. When trac is tagged, the
VLAN ID is inserted into the packet header to identify which
VLAN the packet belongs to. Tagging can identify the port or
interface to send a broadcast message to.
Port Physical port on the Extreme Campus Controller for the
interface.
Enable Device Registration Enable or disable AP registration through this interface. When
enabled, wireless APs use this port for discovery and
registration. Other Extreme Campus Controllers can use this
port to enable inter-Extreme Campus Controller device
mobility if this port is configured to use SLP or the Extreme
Campus Controller is running as a manager and SLP is the
discovery protocol used by the agents.
Management Trac Enable or disable Management Trac through this interface.
Enabling management provides access to SNMP (v1/v2c, v3),
SSH, and HTTPs management interfaces.
MTU Maximum Transmission Unit (MTU). Standard is 1500 bytes.
Fixed value.
Layer 3
IP Address For an Admin topology, the Layer 3 check box is selected
automatically. The IP address is mandatory for a Physical
topology. This allows for IP Interface and subnet configuration
together with other networking services.
CIDR CIDR field is used along with IP address field to find the IP
address range.
FQDN Fully-Qualified Domain Name
DHCP Dynamic Host Configuration Protocol allows network
administrators to centrally manage and automate the
assignment of IP addresses on the corporate network. DHCP
sends a new IP address when a computer is plugged into a
dierent place in the network. The protocol supports static or
dynamic IP addresses and can dynamically reconfigure
networks in which there are more computers than there are
available IP addresses. Valid values are:
• None
• Local Server. Indicates that the Extreme Campus Controller
is used for managing IP addresses.
Related Topics
Certificates on page 303
Local DHCP Management Settings on page 273
Administration
Interfaces
Extreme Campus Controller User Guide for version 5.46.03 353