User's Guide

Table 87: Network Utilities (continued)
Field Description
Ping Initiate the Ping network utility to determine reachability of the
IP address or FQDN that you specify.
Trace Route Initiate the Trace route command, which traces the path of a
packet from Extreme Campus Controller to the IP address or
FQDN that you specify. It lists the routers it passes until it
reaches its destination, or fails to. It also indicates the length of
each hop.
Related Topics
TCP Dump Management on page 342
Packet Capture on page 83
TCP Dump Management
Table 88: TCP Dump Management
Field Description
Interface Target interface. See list of possible interfaces on the Interface
tab.
Filename Specify the name of the dump file.
Save File To Specify where to save the dump file.
Capture File Size (MB) Specify the max limit of the dump file in MB. This feature
enables you to control the size of the resulting dump file so the
file does not become too large.
Capture Files List of previously created dump files. Select a file to take action.
Reports
Generate reports for the Dashboard widgets based on data for a site. Create report templates that
enable you to easily generate consistent reports, and schedule reports using Scheduler for Extreme
Campus Controller.
To generate a report, take the following steps:
1. Create a report template.
A template defines the report type, for example "Top Clients by Usage". Extreme Campus Controller
oers a report template for each Dashboard widget.
2. Configure the report settings.
Select the template, then select Run or Schedule Report, and specify the report settings. Select
Save Report Settings.
3. To run the report now, select Run, or schedule the report from the Report Settings tab.
4. Download the generated report from the Generated Reports tab.
The following tabs are available from the Reports page:
Reports
Tools
342 Extreme Campus Controller User Guide for version 5.46.03